The Omron control technology,Information can be collected in real time from all information devices inside the inspection device.So you can visualize the state of the device,Flexible for use in premonition preservation and quality traceability.It's not just an information machine,Production equipment, etc. are also autonomously communicated through the network,Automatic exchange of information without manual operation,So that both quality and equipment are ideally constructed.
| Main specification | |
|---|
| Brand | OMRON |
| Model | VTS1080 |
| Type 1 | SMT Equipment |
| Type 2 | AOI (Automatic Optical Inspection) |
| Type 3 | |
| Size | 1180MM*1450MM*1500MM |
| Weight | About1250kg |
| Voltage | AC220V 50HZ |
| Rated power | |
| Gas source | |
| Operating System | |
| Other | |
| Parameters | |
|---|
| Transport height | 900±20mm |
| Use humidity range | 35~80%RH(You can't tell) |
| Camera system | 12MpixCamera |
| Checking principles | MDMCLighting+MPSAchieved3DShape Restoration |
| Pixel Resolution | 12.5μm |
| FOV | 50.0*37.5mm |
| Circuit plate size | 50(W)*50(D)~510(W)*680(D)mm |
| Weight (Max) | 4kg |
| Thickness | 0.4~4mm |
| Clear | From the belt surface,Up there:54mmBelow,Down there:50mmBelow(Including base plate thickness,Bend,Widget travel, etc |
| Altitude range | 25mm |
| Check items | Widget Height,Widget Floating,Shape,Missing items,Error,Polar Error,Against,OCRInspection,2Dcode,Widget Offset(X/Y/Angle Offset),Tin Fill(Tin height,Tin length,End Connect Width,I'm going to immerse,Side length),Welds show,Alien,Welds are abnormal,Electro-diversion,electrode form,Are there electrodes,Tinju,Bridge,Widget Distance,Widget Angle. |
