DrewTR7007 3DOnlineSPIAn automated optical detector for tin ointment printing,High Speed OnlineSPITin plaster printer,Test speed is high200c㎡/sec,High-precision online, shadow-free tin ointment printing testing solution provided All3DTest
| Main specification | |
|---|
| Brand | TRI |
| Model | TR7007 |
| Type 1 | SMT Equipment |
| Type 2 | SPI (Solder Paste Inspection) Machine |
| Type 3 | (Online) SPI Solder Paste Inspection |
| Size | 1220*1425*2107(mm) |
| Weight | 850kg |
| Voltage | 220V AC/15A, Single phase |
| Rated power | |
| Gas source | NA |
| Operating System | |
| Other | |
| Basic parameters | |
|---|
| Camera | 4MPCamera |
| Optical Resolution | 10μm(Match14μm) |
| Image Range | 23.20*17.26mm@10μm |
| Type of detectable disadvantage | Siu Tin,Dosik,Leak,Bad shape and bridge |
| Tin Point Measurement Project | Height,Area,Volume,Shift and bridge |
| Horizontal Resolution | 0.5μm |
| Vertical Resolution | 1μm |
| Test speed10um | Top attainable87cm²/sec |
| Test speed14um | Top attainable171cm²/sec |
| Volume recurrence Correct Marks(at 3 Sigma) | <1% on TRI certification target |
| Volume recurrence Tint PointGR&R (at 3 Sigma) | <3% |
| High recurrenceσCorrect Marks(at 3 Sigma) | <1% on certification target |
| High recurrenceσ Tint Point (± 50% Tolerance) | <10% @ 6 Sigma |
| Max. Apparel | ±3.5mm |
| Height Parsing | 0.4μm |
| Height Precision | 2μm(Use Correct Block) |
| Maximum measurable tin point size | 6400*4800μm |
| Minimum detectable tin point size | 100*100μm |
| Minimum detectable tin spot spacing | 100μm |
| Maximum detectable tin point height | 600μm |
| The circuit board is measurable | 50*50-510*460 mm |
| The circuit board holds a gap | 3.5mm |
| Zoom above circuit board | 40mm |
| Zoom below circuit board | 40mm |
| Threadboards measure thickness | 0.5-5mm |
| Maximum heavy limit | 3kg(Standard),5kg(Match) |
