TRITop onlineAOISolutions,Set-up circuit board for five hypervelocity camera shots,A reliable deficiency detection function,Even the most complex welding points and assembly defects can be detected.TR7500 SIIIA powerful combination of smart software and high-performance hardware,Providing reliable and easy to useAOISolutions,I'm more committed to focusing on high-precision tests and minimizing miscalculation,To help optimize your production.• Five-precision multiplesAOI• Smart programmingGUIWith Offline Editor• The smart autoband system reduces access time• Tests are reliable,High Precision,Lower miscalculation
| Main specification | |
|---|
| Brand | TRI |
| Model | TR7500SIII |
| Type 1 | SMT Equipment |
| Type 2 | AOI (Automatic Optical Inspection) |
| Type 3 | SMT AOI Machine |
| Size | 1100 x 1670 x 1550 mm |
| Weight | 1030KG |
| Voltage | |
| Rated power | |
| Gas source | |
| Operating System | |
| Other | |
| Parameter Table | |
|---|
| Item | Specifications |
| Imaging Method | Dynamic Imaging |
| Top Camera | 4 Mpix |
| Angle Camera | 1.3 Mpix or 6.5 Mpix (factory setting) |
| Imaging Resolution | 10 µm, 15 µm (factory setting) |
| Lighting | Multi-phase RGB+W LED |
| 3D Technology | Single/Dual 3D laser sensors |
| Max. 3D Range | 20 mm (with 3D Laser Sensor upgrade optional) |
| Imaging Speed | 4 Mpix@ 10 µm 2D: 60 cm²/sec 4 Mpix@ 15 µm 2D: 120 cm²/sec |
| X-Axis Control | Ballscrew + AC-servo controller |
| Y-Axis Control | Ballscrew + AC-servo controller |
| Z-Axis Control | N/A |
| X-Y Axis Resolution | 1um |
| Max PCB Size | TR7500 SIII: 510 x 460 mm TR7500L SIII: 660 x 610 mm TR7500 SIII DL: 510 x 310 mm x 2 lanes, 510 x 590 mm x 1 lane |
| PCB Thickness | 0.6-5 mm |
| Max PCB Weight | 3 kg |
| Top Clearance | 25 mm [48 mm optional] |
| Bottom Clearance | 40mm |
| Edge Clearance | 3 mm [5 mm optional] |
| Conveyor | Inline Height: 880 – 920 mm * SMEMA Compatible |
| Component | Missing Tombstoning Billboarding Polarity Rotation Shift Wrong Marking (OCV) Defective Upside Down Extra Component Foreign Material Lifted Component |
| Solder | Excess Solder Insufficient Solder Bridging Through-hole Pins Lifted Lead Golden Finger Scratch/Contamination |
| WxDxH | TR7500 SIII: 1100 x 1670 x 1550 mm TR7500L SIII: 1300 x 1630 x 1655 mm TR7500 SIII DL: 1100 x 1770 x 1550 mm Note: not including signal tower, signal tower height 520 mm |
| Weight | TR7500 SIII: 1030 kg TR7500L SIII: 1255 kg TR7500 SIII DL: 1150 kg |
