| Activate PowerStartup Power | 45KW |
| Normal working powerOperation Power Consumption | Approx.11KW |
| Control systemControl System | PC+PLC |
| Spray moveSpraying movement | Step into the motor(Step motor) |
| Spray pressureSpray Pressure | 0.2Mpa~0.4Mpa |
| Welder flow controlFlux Flow Arrange | Option |
| Automatic weldingAuto Fill Flux | Plot(Standards) |
| The windExhaust | It's windy(Top exhaust)+Side wind(Side exhaust) |
| Windpipe diameterExhaust Ducting Diameter (mm) | Ø250 |
| Flow VolumeExhaust Capacity | 30M³/min |
| Preheating modePreheating Mode | The breeze/Infrared(Convection/IR emitter) |
| Temperature Control MethodControl Mode | PID |
| Number of preheat zonesPreheating Zone Number | 3 |
| Length of preheat areaPreheating Length (mm) | 1800 |
| Preheat temperature adjustable rangePreheating Temperature | Room temperature(Room temperature)~200℃ |
| Preheating timeWarm-up Time(min) | Approx. 12min(setting:150°C) |
| Hot wind motorBlower Motor | 250W 3PH 220 VAC |
| Width RangePCB Width(mm) | 50~610 |
| PCBTransfer DirectionConveyor Direction | L One>R(Option:ROne>L) |
| Transfer speed rangeConveyor Speed(mm/min) | 500~1800 |
| Transport heightConveyor Height(mm) | 750±20 |
| AllowPCBWidget HeightAvailable Component Height(mm) | Move(Top)120(Option:250)Down(Bottom)15 |
| Speed ControlConveyor Speed Control Mode | Turner closed-ring, no velocity(Closed-loop stepless speed regulation Inverter |
| ClawFingers | New kind of hook claw(New Design Double-hook Type)Option:It's a special claw(Special jig for fixture) |
| Track angleConveyor Angle | 4~7° |
| Type of tin furnaceType of solder Pot | Mechanical(Motor drive) |
| Tin stove materialSolder Pot Material | Cast iron(Casting lron) |
| The summit modeWave Height Adjustment | Frequency converter(Inverter) Approx:Computer digital control(Digital Control by PC) |
| The cooling methodCooling Method | Force cold(Air Cooling)Option:Cold water machine(Water cooling) |
| Heating power of tin furnacesHeater Power | 280 VAC 18KW |
| Maximum temperature of tin furnaceSolder Pot Temperature | 300°C |
| Tin capacitySolder Pot Capacity | 640KG |
| Wave powerWave Drive Power | 180W x 2 3PH 220 VAC |
| The temperature of the tin furnaceSolder Pot Warm-up Time | Approx. 150min (seting:250°C) |
| The temperature control of the furnaceTemperature Control Mode | PID |
| Claw-washing systemFinger Cleaning System | Brush(Brush) |