1,Plot spray,Preheating and welding units,The whole welding process can be done in smaller machine space;2,Small land area,Save space for installation;3,Implementation of the latest version of the operating software,Human interface friendly,Operation is easy to understand;4,Welding process real time monitoring,Process Record;5,Use of standard electromagnetic pump tin furnaces,Part without wear,Easy to maintain;6,Turnback orbit design,We can get the operator on the same side of the machinePCBThe top of the line.
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | FS |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Selective Soldering Machine |
| Size | 1350*1620*1700mm |
| Weight | 800kg |
| Voltage | 3phase380V 50/60HZ |
| Rated power | |
| Gas source | 0.5~0.8MPA |
| Operating System | |
| Other | |
| Basic parameters | |
|---|
| MaxPCBBoard Size/Max PCB size (mm) | 300(L)x400(W) |
| MinPCBBoard Size/Min PCE size (mm) | 120(L)x50(W) |
| PCBTop gap/PCB top side clearance (mm) | 120 |
| PCBBottom gap/PCB bott om side clearance (mm) | 30 |
| PCBCraft side/PCB techni cs side (mm) | ≥3 |
| The conveyor belt is above ground altitude/Corveyor height from floor (mm) | 850±25 |
| PCBTransfer speed/PCB corveying speed (m/min) | 0.2-10 |
| PCBWeight/PCB weight (kg) | ≤5 |
| PCBThickness(Contains a cure)/FCE thi ckness (include fixture) (mm) | 1-6 |
| Transferable band range/Conveying belt width adjustment (mm) | 50-400 |
| Transfer bandwidth/Conveying belt width adjus tment mode | Electric/Power driven |
| PCBTransfer Direction/PCB Corveying direction | Left to RightLeft to right |
| Max/Max power consimption (kw) | <9 |
| Ambient temperature/Ervironment temperature(℃) | 10-35 |
| Machine noise/Machine noise level(dB) | <65 |
| Communications interface/Communi cation interface | SMEMA |
| Minimal nozzle diameter/Min nozzle outer di ameter (mm) | 5.5 |
| Nozzle I.D/ Irner diameter of nozzle (mm) | 2.5-10 |
| Maximum summit height/Max solder wave height (mm) | 5 |
| Tin capacity/solder capacity (kg) | Aboutapprox. 13 |
| Maximum weld temperature/Max solder temperature (℃) | 330 |
| Heating power of tin furnaces/soldering heating power (kw) | 1.15 |
| Nitrogen top-in pressure/Max.irput pressure Mpa) | 0.6 |
| Nitrogen consumption/Nitrogen consumption (m3/h) | 1.5 |
| Need nitrogen purity/Nitrogen purity (%) | >99.999 |
| Spray height/Spray height (mm) | 60 |
| Spray speed/ Spray speed(mm/ s) | 200 |
| Nozzle Automatic Cleaning/Spray nozzle automatic cleaning functi on | Program control/Program control |
| Welding tank capacity/Flux capacity(L) | 2 |
Scan to add
