PEAKModularization of series,Digital and human design,In Function,Performance,Stability and reliability,Security,Maintenanceability,Good operational and human advantages,Reduced operating costs for both clients,It also provides a strong guarantee that the client will produce a good product,It's called the Boov Welds"Top"The work,Client investment first"Brand products".
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | PEAK610 |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Wave Soldering Machine |
| Size | 4450*1670*1700mm |
| Weight | 2600KG |
| Voltage | 3ph 380v 50hz Activate Power45KW |
| Rated power | |
| Gas source | 0.5MP |
| Operating System | |
| Other | |
| Basic parameters | |
|---|
| Normal working powerOperation | Approx.11Kw |
| Control systemControl System | PC+PLC |
| Spray moveSpraying movement | Step into the motor(Step motor) |
| Spray pressureSpray Pressure | 0.2Mpa~0.4Mpa |
| Welder flow controlFlux Flow Arrange | Option |
| Automatic weldingAuto Fill Flux | Plot(Standards) |
| The windExhaust | I'm going to smoke( Top exhaust)+Side wind(Side exhaust) |
| Flow VolumeExhaust Capacity | 30cubic metres/min |
| Preheating modePreheating Mode | The breeze/Infrared(Convection/lR emitter' |
| Temperature Control Method Control Mode | PID |
| Number of preheat zonesPreheating Zone Number | 3 |
| Length of preheat area Preheating Length (mm) | 1800 |
| Preheat temperature adjustable rangePreheating Temperature | Room temperature(Room temperature)~200℃ |
| Preheating timewarm-up Time(min) | Approx.12min(setting:150℃) |
| Hot wind motor Blower Motor | 250W 3PH 220 VAc |
| Width RangePCB width(mm) | 50~610 |
| PCBTransfer DirectionConveyor Direction | LOneR(Option:ROneL) |
| Transfer speed rangeConveyor Speed(mmmin) | 500~1800 |
| Transport heightConveyor Height(mm) | 750Land20 |
| AllowPCBWidget HeightAwaillable Component Height(mm) | Move(Top)120(Option:250)Down(Bottom)15 |
| Speed Control Conveyor Speed Control Mode | Turner closed-ring, no velocity(Closed loop) |
| Track angleConveyor Angle | 4~7° |
| Type of tin furnace Type of solder Pot | Mechanical(Motor drive) |
| Tin stove material Solder Pot Material | Total titanium(Full titanium) |
| Heating power of tin furnacesHeater Power | 220V 13.5KW |
| Maximum temperature of tin furnace Solder Pot Temperature | 300℃ |
| Tin capacity Solder Pot Capacity | 500kg |
| Wave powerwave Drive Power | 180wW*2 3PH 220 vAc |
| The temperature of the tin furnace Solder Pot Warm-up Time | pprox.150min(setting: 250℃) |
| The temperature control of the furnaceTemperature Control Mode | PID |
| Claw-washing systemFinger Cleaning System | Brush(Brush) |
Scan to add
