デバイス

MPM Momentum Dual LaneThe tin ointment printer is independent,Right in front of the motor-driven silk pole/Post-drive and integrated submission procedures ensure the accuracy of razor pressure,It doesn't have to be a razor blade type,Change in length or thickness.

Main specification
Brand	MPM/Speedline
Model	MPMMOMENTUMDUALLANE
Type 1	SMT Equipment
Type 2	Solder Paste Printing & Jetting
Type 3	Solder Paste Printer
Size	1418.6x1593.1x1638.4mm
Weight	Box weight:Elite(Three tracks)1332kg(2937lbs)
Voltage	200to240VAC(±10%)Single@50/60Hz,15A
Rated power
Gas source	100psi@4cfm(Standard operating model)to18cfm(Vacuum Wipe)(6.89bar@1.9L/sec to8.5L/sec),12.7mm(0.5")A diameter tube
Operating System
Other

Baseboard Processing
Item	Specifications
Maximum base size (X x Y)	609.6mmx508mm (24x20inch)
Minimum base plate size (X x Y)	50.8mmx50.8mm(2x2inch)
Size of base plate thickness	0.2mm~5.0mm(0.008~0.20inch)
Maximum base weight	4.5 kg (10 lbs)
Blank Edge	3.0mm (0.118")
Bottom gap	12.7 mm (0.5") Standard,Configureable 25.4 mm (1.0")
Baseboard Support Method	Magnetic caps optional:H-towers,Support block,Special kits,Quik-Tool
Baseboard holding	Tighten the top,Workstation vacuum,EdgeLocEdge holding system
Transmission channel	2.5kgto4.5kg(5.51lbsto9.92lbs)Fastest508mm/s(20in/s)

Print parameters
Maximum print area(XxY)	609.6mmx508mm(24x20inch)
Print Simulation(Snap-off)	0mm~6.35mm(0~0.25inch)
Printing speed	0.635~304.8mm/sec(0.025~12inch/sec)
Printing pressure	0to22.7kg(0lbto50lbs)
Template Frame Dimensions	737mmx737mm(29x29inch)Optional to adjust the frame or smaller size template
Image View Field(FOV)	10.6mmx8.0mm(0.417x0.315inch)
Baseline point type	Standard Shape Reference Point(SeeSMEMAStandard),Weldette/Open
Camera system	Single digital camera-MPMPatented Up/Down vision system
System-wide accuracy and repetition precision	±12.5Micrometres(±0.0005inch)@6σ,Cpk≥2.0
Actual cassiterite ointment and repeat precision:	±20Micrometres(±0.0008inch)@6σ,Cpk≥2.0
Loop Time	Elite(Three tracks)6sec