Attrezzature

EdisonIt will bring you higher capacity than ever before:Total Loop Time15sec,Including printing and template wipe loop time.It's because..EdisonDesign,Significant reduction in single printing cycle time,It saves time.

Main specification
Brand	MPM/Speedline
Model	MPMEDISON200
Type 1	SMT Equipment
Type 2	Solder Paste Printing & Jetting
Type 3	Solder Paste Printer
Size	1282x1442x1580mm
Weight	To be check
Voltage	200to240VAC(±10%)Single@50/60Hz,15A
Rated power
Gas source	100psi@4cfm(Standard operating model)to18cfm(Vacuum Wipe)(6.89bar@1.9L/sto8.5L/s),12.7mmA diameter tube
Operating System
Other

Specifications
Maximum base size(XxY)	450mmx350mm(17.72"x13.78")For comparison14"Big circuit board,Special kits required
Minimum base plate size(XxY)	50mmx50mm(1.97"x1.97")
Size of base plate thickness	FoilClamps(Slice-tight system):0.2mmto6.0mm(0.007"to0.236")
EdgeLoc(Edge holding system)	0.8mmto6.0mm(0.031"to0.236")
Maximum base weight	4.5kg(10lbs)
Blank Edge	3.0mm(0.118")
Bottom gap	12.7mm(0.5")Standard.Configureable25.4mm(1.0")
Baseboard holding	Tighten the top,Workstation vacuum option:EdgeLocEdge holding system
Baseboard Support Method	Magnetic caps and support blocks

Print parameters
Maximum print area(XxY)	450mmx350mm(17.71"x13.78")
Print Simulation(Snap-off)	0mmto6.35mm(0"to0.25")
Printing speed	305mm/sec(12.0"/sec)
Printing pressure	0to20kg(0lbto44lbs)
Template Frame Minimum Size	584.2mmx584.2mm(23"x23")A smaller size template option
Template Frame Size Maximum	737mmx737mm(29"x29")
Image View Field(FOV)	9.0mmx6.0mm(0.354"x0.236")
Baseline point type	Standard Shape Reference Point(SeeSMEMAStandard),Weldette/Open
Camera system	Single digital camera-Separate Optical Visualization of Patents
System-wide accuracy and repetition precision	±8Micrometres(±0.0003")@6σ,Cpk≥2.0
Actual welding and repeat precision	±15Micrometres(±0.0006")@6σ,Cpk≥2.0
Loop TimeEdison 300	15Seconds include printing and wipe
Loop TimeEdison 200	20Seconds include printing and wipe