Welders back at the 8th TemperatureSER-708AProduct characteristics:1,Transmission system,Deflective orbit design,Transport stability and reliability.2,Module structure,Cleaning and maintenance.Back-and-back wind design,Effective prevention of air flow impacts between hot zones,Keep the temperature accurate.Long-lived high-performance hot-wind motors,Frequency changer control,It's hot.3,Internal temperature curve test function,Virtual Simulation,Save set time.4,Two cooling areas,New proprietary design for cooling systems,Forced cold and water cooling structures can be upgraded for switching;Maintenance is easy and fast:Temperatures in cooling areas show adjustability.5,Manual+Electric scheduling structure design,Configure emergency manual transmission structures,In case the power goes out and burns inside the furnacePCB.6,Importing ammonia currents takes into account the oxygen analyser's accurate control of the nitrogen flow,Achieving low-cost, low-cost production.7,Design of special bandwidth and transmission structures,PromisePCBTransmission is stable and reliable,The chain uses a card plate chain.
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | SER708A |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Hot Air Reflow Oven |
| Size | 5050x1372x1450mm |
| Weight | 2000-2200kg |
| Voltage | AC 3phase 380V(50/60HZ );Full Capacity:57KW |
| Rated power | |
| Gas source | N/A |
| Operating System | |
| Other | |
| Heating component | |
|---|
| Temperature Configuration | 8Temperature, 16Heating module |
| Length of heating area | 3000mm |
| The cooling method | Double cooling:Force cold |
| Typhoon☐diameter,Outload | 2-Φ145,Flow requirements20-25㎥/min x2 |
