Momentum II HiE (Efficiency)It's a single-track printer,Got a motor-driven visual system X,Yand Z Axis,Instead of walking into the motor. Faster than a motor,Get the motor to drive the visual system at a higher speed,Increased production and reduced cycle time,Jean Hi-EBe an efficient one,High-volume printing press.
| Main specification | |
|---|
| Brand | MPM/Speedline |
| Model | MomentumIIHiE |
| Type 1 | SMT Equipment |
| Type 2 | Solder Paste Printing & Jetting |
| Type 3 | Solder Paste Printer |
| Size | 1203x1592x1526mm(Remove lighthouse height940mm) |
| Weight | 862kg(1900 lbs);Box weight:1155.5kg(2547 lbs) |
| Voltage | 200to240VAC(±10%) Single @ 50/60Hz, 15A |
| Rated power | |
| Gas source | 100psi@4cfm(Standard operating model)to18cfm(Vacuum Wipe)(7bar@5L/sec to12L/sec), 12.7mm(0.5") A diameter tube, ODx9.5mm(3/8") Pipeline Inner Radius |
| Operating System | |
| Other | |
| Baseboard Processing | |
|---|
| Maximum base size(X x Y) | 609.6mmx508mm(24"x20")X Size greater than 20 The inch circuit board needs a special cure. |
| Minimum base plate size(X x Y) | 50.8mmx50.8mm (2"x2") |
| Size of base plate thickness | 0.2mmto5.0mm(0.008" to 0.20")Top6.0 mm (0.24") No top plywood |
| Maximum base weight | 4.5kg(10 lbs) |
| Blank Edge | 3.0mm (0.118") |
| Bottom gap | 12.7mm(0.5") Standard.Configureable25.4mm (1.0") |
| Baseboard holding | EdgeLoc II,Workstation vacuum(Optional: Tighten the top,EdgeLoc+) |
| Baseboard Support Method | Magnetic Top;Optional: Vacuum Block,Vacuum pin,Support block,Special kits,Patented Automatic Devices,Quik-Tool |
