FM-350 Welds without lead Circle Arc Appearance,Streaming Design;Aluminium-type input plate structure,Special stainless chain transfer,The tin furnaces use extraheated heating,It's made of cast iron,Temperature controlPIDModalities,Temperature accuracy achieved±2℃.Two waves of close design,Perfect for lead-free welding,Electron rise and fall in tin furnaces/Access.
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | FM350 |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Wave Soldering Machine |
| Size | 3600*1400x1700mm |
| Weight | About1250Kg |
| Voltage | San380VAC,50Hz,Total Power:Approx.32KW |
| Rated power | |
| Gas source | 4~6Bar. 100L/min. |
| Operating System | |
| Other | |
| Specifications | |
|---|
| Base size | W50~350mm*H120mm |
| Board height | 750±20mm |
| Transfer speed | 500~1800mm/Min |
| Transfer angle | 4~7degrees |
| Transfer Direction | Left→Right |
| Welder capacity | Approx.18L |
| Spray exhaust | Approx.30m³/min |
| Preheat temperature | Max.200℃ |
| Temperature of tin furnaces | Max.300℃ |
| Tin capacity | Approx.500Kg |
| Peak height | Approx.12mm |
| Claw washing device | It's for brush cleaning |
| .Control system | Handheld or touch screen+PLCElectrical control system,Central British Windows interface,Temperature Curve Test,Functions such as data storage. |
| Cooling system | Force Cold Wind,Cold water machine |
| Length of preheat area | 1.8 Rice |
| Preheating mode | Implementation of heat module,Three hot zones,PIDTemperature Control(Infrared,Micro-heat cycle heating any combination) |
| Claw type | Round-mouth claws,New double hook claws,Slinky claws,Ducky claws |
| Temperature accuracy achieved | ±2℃ |
| Run Power | Approx.8KW |
| Board Width | Manual reconciliation |