Product characteristics:1,Autonomous development of electromagnetic pumps;2,Introduction of a rolling-wheel transmission system,Increase welding space;3,Modular design,Easy to maintain;4,Show welding status at all times.Product Introduction:SunflowSUse of electromagnetic pumps,Compared to mechanical pumps,The Electromagnetic Pump is operating at a steady peak,No motor wear,Very little slag is produced.In addition, the Hummer Models use high-precision motion systems,To ensure the accuracy of the rigging,And special processes,It's a great way to eliminate tin.User experience,SunflowSProvide welding surveillance cameras and an automatic detection of summit heights,It greatly enhances the user experience.
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | SUNFLOWS |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Selective Soldering Machine |
| Size | 1300*1620*1712mm |
| Weight | 800KG |
| Voltage | 3phase380V 50/60HZ |
| Rated power | |
| Gas source | 0.5-0.8MPA |
| Operating System | |
| Other | |
| Basic parameters | |
|---|
| MaxPCBBoard Size/Max PCB size(mm) | 510(L)x450(W) |
| MinPCBBoard Size/Min PCB size (mm) | 120(L)*50(W) |
| PCBTop gap/PCB top side clearance (mm) | 120 |
| PCBBottom gap/PCB bottom side clearance (mm) | 30 |
| PCBCraft side/PCB technics side (mm) | ≥3 |
| The conveyor belt is above ground altitude/Conveyor height from floor (mm) | 850±25 |
| PCBTransfer speed/PCB conveyor speed (mm/s) | 0-200mm/s |
| PCBWeight/Max PCB weight (kg) | ≤5 |
| PCBThickness(Contains a cure)/PCB thickness (including fixture)(mm) | 1-6 |
| Transferable band range/Conveyor width adjustment (mm) | 50-450 |
| Transfer bandwidth/Conveyor width adjustment mode | Electric/Electromotion |
| PCBTransfer Direction/PCB conveyor direction | Left to Right/Left to right |
| Pressure for compressed air/Compressed air required pressure (Mpa) | 0.5-0.8 |
| Power voltage/Main voltage (VAC) | 380 |
| Power capacity differentialNoltage tolerance range (%) | 6-10 |
| Frequency/Frequency (HZ) | 50/60 |
| Max/Max power consumption(kw) | <9 |
| Ambient temperature/Ambient temperature (℃) | 10-35 |
| Machine noise/Permanent sound level (dB) | <65 |
| Communications interface/Communication interface | SMEMA |
| Welding nozzles/Solder nozzle | High precision single nozzle/High precision single nozzle |
| Minimal nozzle diameter/Smallest nozzle outer diameter (mm) | 5.5 |
| Nozzle I.D/Nozzle inner diameter (mm) | 2.5-10 |
| Maximum summit height/Max solder wave height (mm) | 5 |
| Tin capacity/Solder volume (kg) | 13 |
| Maximum weld temperature/Max solder temperature (℃) | 330° |
| Heating power of tin furnaces/Soldering heating power (kw) | 1.5*2 |
| Auto-plus tinsion diameter/Solder diameter for auto solder feeding (mm) | 2 |
| Nitrogen supply/Nitrogen supply | Provided by clients/Offered by customer |
| Nitrogen pressure/Nitrogen required pressure (Mpa) | 0.6 |
| Nitrogen consumption/Nitrogen consumption (m3/h) | 1.5 |
| Need nitrogen purity/Required particle cleanliness (%) | 99.999% |
| Preheat temperature range/Preheat temperature range(℃) | <200 |
| Preheating temperature accuracy/Preheat control accuracy (℃) | ±2 |
| Heating power/Preheating medium (kw) | 6.75 |
| PCBTemperature evenness/PCB temperature uniformity (℃) | 5 |
| Heat/Preheating medium | Hot wind/Hot air |