It's a lead-free hot windIPC-710NEfficient:A theoretical basis for thermal energy supply,Matching capacity with volume by appropriate heat power,It's a big heat supply.Enough heat to make it work,It's a short heating zone;Low energy consumption:Theory and practical validation,Same speed as a peer passes,Set at the same temperature,Ensure that the size component is less heat intensive,Achieving balance;Thermal Balance:Theoretical design and practical testing,Validation via client,Repetitive results obtainedCPKValue(CPK>1.67),It also allows many clients to see low energy consumption at the plant site.
| Main specification | |
|---|
| Brand | SUNEAST |
| Model | IPC710N |
| Type 1 | SMT Equipment |
| Type 2 | Soldering Equipment |
| Type 3 | Hot Air Reflow Oven |
| Size | 5750*1430*1450mm |
| Weight | About3000KG |
| Voltage | AC 3Ф380V(50/60HZ),Total Power73KW |
| Rated power | |
| Gas source | N/A |
| Operating System | |
| Other | |
| Specifications | |
|---|
| Activate Power | 35KW |
| Normal working power | 9.5KW |
| Nitrogen protection | Yeah |
| Size of Board Width | W50-400mm |
| Baseboard Widget Height | Chains with long axes as benchmarks+30mm,-20mm |
| Temperature Configuration | 10Temperature,20Heating module |
| Length of heating area | 3600mm |
| The cooling method | Move2A cooling zone:Water cycle+External chillers |
| Maintenance of cooling area | Standard Type |
| Recycle the fragrance | 2Level Active Filter Recycling |
| Temperature wind velocity adjustment | The wind speed of the upper and lower temperatures is independently regulated |
| Hot wind control | Variable frequency control |
| Working temperature range | Room temperature ~320℃ |
| Temperature precision | ±1℃EnhancedP.I.DControl |
| Temperature Repeat Precision | Continuous production of temperature differentials between panels±1℃ |
| PCBNaked Board Horizontal Temperature | ±1℃ |
| Control Mode | PC+PLCSystem |
| Power outage protection | UPSAnd time out |
| Chain transport height | 900±20mm |
| Transmission | Chain/PINLong5mm+CyberSync Transfer |
| Transfer speed | 0.35-1.5m/minprogrammable |
| Emission requirements | Import and export exhaust requirements are15-20m3 /min |
| Air vent diameter | Import/export exhaust gas vent diameterΦ145 Medium |
| WindowsOperation Interface | English is a lot of online free trade, LCDMonitor |